Accell MPC series User Manual download pdf (Page 12)

English-11English-10

English

RAID Setup Step 2:

Press the <2> key. This should now show the LD View Menu, See Figure 14

below.

Figure 14. Dene RAID beginning Screen

RAID Setup Step 3:

Press <CTRL> <C> to dene a new RAID (See Figure). Press <ENTER> to

select the RAID mode See Table 1 for denitions of the currently supported

RAID modes. Then repeat pressing the <Down Arrow Key> until the rst

selected hard drive is highlighted. Then press the <Y> key to add to the

RAID, then press the <Down Arrow Key> and <Y> key until all the desired

drives are added to the RAID. (See Figure 15 below)

Figure 15. Dening RAID

1 2 ... 7 8 9 10 11 12 13 14 15 16 17

No comments

Accell MPC series User Manual Page 12